SG2100 Buy or Check Shipping
|
Dave's Web Shop
Sg2100 H-H Offset Dish Positioner Mover DiSEqC
Sg2100 H-H Offset Dish Positioner Mover DiSEqC
Move your dish with DiSEqC commands and this dish mover. Uses only the coax cable for control. Works with any DiSEqC version 1.2 equipped receiver. Use the same coax as your lnb to control the dish.
Here is how it hooks up...
- Here are the details !
- Requires DiSEqC version 1.2
- One coax to dish controller and lnb
- Has Go To X Function
- Low Noise and High Efficiency in a compact design
- Hardware Limits are adjustable
- LED indicators
- East/West Manual button
- Works for offset dishes to 1.2 Meters in size with U Clamps
- Voltages input/output - 13/18 VDC
- 60 satellite positions
- Use common F connectors
- Resync funtion
- Goto Postion 0 function
- East/West limits - Hardware and software
- LED color indicators for errors and modes
- Antenna mount tube size is 55x160mm
- Unit mount size is 35-65mm
Lots of MPEG-2 signals are now spread out on different satellites. This handy motor eliminates having to use multiple dishes or the headache of moving one dish from satellite to satellite.
Remember, your receiver must be DiSEqC Version 1.2 capable, if you are in doubt and don't know, email us and we will help you.
Search Site
Dave's Web Shop Hobby Model Kit Site Map
Dave's Web Shop Satellite Site Map
- We are happy to ship most items to customers outside the United States
- Write down the items you want
- Click here REQUEST QUOTE for international shipment
- Tell us what you want and your full shipping address and country
We gladly ship to customers outside the United States
It is easy, just follow these directions
********************************************************************